


| 序号 | 项目 | 分项 | ZL2100ATF-ZC 三类底盘 |
|---|---|---|---|
| 1 | 三类底盘整备质量Three types of chassis curb weight | — | 5000 |
| 2 | 轴荷分配Axle load distribution | 前桥 front axle | 3000 |
| 后桥 rear axle | 2000 | ||
| 3 | 整车最大允许总质量Maximum allowable total mass of the vehicle | — | 12000 |
| 4 | 最大允许轴荷Maximum allowable axle load | 前桥 front axle | 6000 |
| 后桥 rear axle | 6000 |
| 序号 | 项目 | 分项 | ZL2100ATF-ZC 三类底盘 |
|---|---|---|---|
| 1 | 外廓尺寸Overall dimensions | 长 long | 6810 |
| 宽 wide | 2460 | ||
| 高 high | 1680 | ||
| 2 | 轴距 wheelbaseMT | — | 4200 |
| 3 | 前悬 Front suspension | — | 1050 |
| 4 | 后悬 rear overhang | — | 1560 |
| 5 | 轮距 Track width | 前轮距 Front wheelbase | 2100 |
| 后轮距 Rear wheelbase | 2100 | ||
| 6 | 离地间隙Ground clearance | 前桥 front axle | 400 |
| 后桥 rear axle | 400 | ||
| 7 | 通过角Through the angle | 接近角 Approaching angle | 41° |
| 离去角 Departure angle | 38° | ||
| 8 | 前桥中心处车架上表面离地高度Ground clearance height of the upper surface of the frame at the center of the front axle | — | 1095 |
| 9 | 后桥中心处车架上表面离地高度Ground clearance height of the upper surface of the frame at the center of the front axle | — | 1095 |
| 10 | 最高车速 Maximum speed(km/h) | — | ≤120 |
| 11 | 最大爬坡度 Maximum climbing gradient(%) | — | ≤60 |
| 12 | 最小转弯直径 Minimum turning diameter(m) | — | ≤19 |
| 序号 | 总成 | 分项 | ZL2100ATF-ZC 三类底盘 |
|---|---|---|---|
| 1 | 发动机 Engine | 型号 Model | D6.7NS6B320 |
| 最大扭矩 Maximum torque | 1200N.m@1300rpm | ||
| 额定功率 Rated power | 231kW@2300rpm | ||
| 2 | 变速器 Transmission | 型式 Pattern | 艾里逊 3000 自动变速器(铝合金外壳),有六个前进挡,一个倒挡。各档速比为:3.49/1.86/1.41/1.00/0.75/0.65 R-5.03。 |
| 3 | 分动器 Transfer case | 型式 Pattern | 高低两速、全时驱动,带轴间差速锁,可强制锁止,高档速比 0.95,低档速比 2.12。 |
| 差速锁型式 Differential lock type | 开关型气动操纵。 | ||
| 4 | 驱动桥 Drive axle | 型式 Pattern | 断开式,齿轮式轮边减速的驱动桥,速比 5.921,带开关型气动操纵轮间差速锁,20 寸盘式制动器,24 寸制动气室。 |
| 5 | 车架 Bicycle frame | 型式 Pattern | 冲压直大梁铆接车架,前端带牵拖车钩,高强度钢板材料。 |
| 纵梁最大断面尺寸Maximum cross-sectional dimensions of the longitudinal beam | (腹高翼宽板厚)280mm80mm5+3mm。 | ||
| 6 | 悬架系统 Suspension system | 前悬架 Front suspension | 双横臂独立悬架,等刚度螺旋弹簧(上跳极限 150mm),带双向液力筒式减振器及横向稳定杆。 |
| 后悬架 Rear suspension | 双横臂独立悬架,等刚度螺旋弹簧(上跳极限 150mm),带双向液力筒式减振器及横向稳定杆。 | ||
| 7 | 车轮及轮胎 Wheel and tire | 规格 Specifications | 365/80R20,14 层级。轮胎最大内轮 / 外轮转角 38° /32°,可选装带内支撑体的轮胎,带备胎。 |
| 轮辋 Wheel rim | 10.0-20 对开式铝合金轮辋,带备胎。 |